Ganister

Icelandite

Ganister vs Icelandite

Ganister

Icelandite

Add ⊕

1 Definition

1.1 Definition

A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.

Icelandite belongs to volcanic igneous rocks which is rich in iron and belongs to andesite rock

1.2 History

1.2.1 Origin

England

Iceland

1.2.2 Discoverer

Unknown

Ian S. E. Carmichael

1.3 Etymology

From gan′is-ter i.e a hard, close-grained siliceous stone, often forming the stratum which underlies a coal-seam

From its origin place near Cenozoic volcano near the parsonage Þingmúli in East Iceland

1.4 Class

Sedimentary Rocks

Igneous Rocks

1.4.1 Sub-Class

Durable Rock, Hard Rock

1.5 Family

1.5.1 Group

Not Applicable

Volcanic

1.6 Other Categories

Coarse Grained Rock, Fine Grained Rock, Opaque Rock

Fine Grained Rock, Opaque Rock

2 Texture

2.1 Texture

Clastic, Granular, Rough

Aphanitic to Porphyritic

2.2 Color

Beige, Black, Brown, Colourless, Cream, Dark Brown, Green, Grey, Light Green, Light to Dark Grey, Pink, Red, White, Yellow

Bluish - Grey, Grey, Pink, Yellow

2.3 Maintenance

Less

2.4 Durability

Durable

2.4.1 Water Resistant

✔ ✘

2.4.2 Scratch Resistant

✔ ✘

2.4.3 Stain Resistant

✔ ✘

2.4.4 Wind Resistant

✔ ✘

2.4.5 Acid Resistant

✔ ✘

2.5 Appearance

Rough

Dull and Soft

3 Uses

3.1 Architecture

3.1.1 Interior Uses

Decorative Aggregates, Entryways, Flooring, Homes, Interior Decoration

Decorative Aggregates, Floor Tiles, Homes, Interior Decoration, Kitchens

3.1.2 Exterior Uses

As Building Stone, Garden Decoration, Office Buildings, Paving Stone

Office Buildings, Roof Tiles

3.1.3 Other Architectural Uses

Curbing

3.2 Industry

3.2.1 Construction Industry

Cement Manufacture, Construction Aggregate, for Road Aggregate, Production of Glass and Ceramics, Raw material for the manufacture of mortar

Cobblestones, Construction Aggregate, for Road Aggregate

3.2.2 Medical Industry

Not Yet Used

3.3 Antiquity Uses

Artifacts, Monuments, Sculpture, Small Figurines

Artifacts, Jewellery, Sculpture, Small Figurines

3.4 Other Uses

3.4.1 Commercial Uses

An Oil and Gas Reservoir, In aquifers, Petroleum reservoirs, Soil Conditioner, Source of Magnesia (MgO), Tombstones

Cemetery Markers, Creating Artwork

4 Types

4.1 Types

Not Available

4.2 Features

Available in Lots of Colors and Patterns, Generally rough to touch, Very fine grained rock

Generally rough to touch, High silica content, Is one of the oldest rock

4.3 Archaeological Significance

4.3.1 Monuments

Used

Not Yet Used

4.3.2 Famous Monuments

Data Not Available

Not Applicable

4.3.3 Sculpture

Used

4.3.4 Famous Sculptures

Data Not Available

4.3.5 Pictographs

Not Used

4.3.6 Petroglyphs

Not Used

4.3.7 Figurines

Used

4.4 Fossils

Present

Absent

5 Formation

5.1 Formation

Ganisters are formed by the destruction of easily weathered minerals mainly feldspar, within the surface horizon of soil by soil-forming processes.

Icelandite is a fine-grained, hard rock which is a type of metasomatite, essentially altered basalt. It forms with or without crystallization, either below the surface as intrusive rocks or on the surface as extrusive rocks.

5.2 Composition

5.2.1 Mineral Content

Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz

Amphibole, Apatite, Biotite, Feldspar, Garnet, Hornblade, Ilmenite, Magnetite, Plagioclase, Pyroxene, Quartz, Zircon

5.2.2 Compound Content

Aluminium Oxide, CaO, Iron(III) Oxide, Potassium Oxide, MgO, Sodium Oxide, Silicon Dioxide

Silicon Dioxide

5.3 Transformation

5.3.1 Metamorphism

✔ ✘

5.3.2 Types of Metamorphism

Not Applicable

Burial Metamorphism, Cataclastic Metamorphism, Contact Metamorphism, Hydrothermal Metamorphism, Impact Metamorphism, Regional Metamorphism

5.3.3 Weathering

✔ ✘

5.3.4 Types of Weathering

Biological Weathering

5.3.5 Erosion

✔ ✘

5.3.6 Types of Erosion

Water Erosion, Wind Erosion

Chemical Erosion, Coastal Erosion, Sea Erosion, Water Erosion, Wind Erosion

6 Properties

6.1 Physical Properties

6.1.1 Hardness

6-77

1 7

6.1.2 Grain Size

Coarse or Fine

Very fine-grained

6.1.3 Fracture

Splintery

Uneven

6.1.4 Streak

White

6.1.5 Porosity

Highly Porous

Less Porous

6.1.6 Luster

Dull

Vitreous

6.1.7 Compressive Strength

95.00 N/mm²NA

0.15 450

6.1.8 Cleavage

Perfect

Not Available

6.1.9 Toughness

2.6

1.1

6.1.10 Specific Gravity

2.2-2.82.5-2.8

0 8.4

6.1.11 Transparency

Opaque

6.1.12 Density

2.2-2.8 g/cm³2.11-2.36 g/cm³

0 1400

6.2 Thermal Properties

6.2.1 Specific Heat Capacity

0.92 kJ/Kg K2.39 kJ/Kg K

0.14 3.2

6.2.2 Resistance

Heat Resistant, Impact Resistant, Pressure Resistant

Heat Resistant, Pressure Resistant, Scratch Resistant, Wear Resistant

7 Reserves

7.1 Deposits in Eastern Continents

7.1.1 Asia

China, India, Kazakhstan, Mongolia, Russia, Uzbekistan

India, Indonesia, Japan, Nepal, South Korea

7.1.2 Africa

Namibia, Nigeria, South Africa

Egypt, Ethiopia, Morocco, Namibia, South Africa, Tanzania

7.1.3 Europe

Austria, Denmark, Germany, Great Britain, Netherlands, Norway, Poland, Sweden, Switzerland, United Kingdom

Austria, Finland, Germany, Italy, Romania, Turkey, United Kingdom

7.1.4 Others

Greenland

Not Yet Found

7.2 Deposits in Western Continents

7.2.1 North America

Canada, USA

Mexico, USA

7.2.2 South America

Brazil

Argentina, Bolivia, Chile, Colombia, Ecuador, Peru, Venezuela

7.3 Deposits in Oceania Continent

7.3.1 Australia

New South Wales, New Zealand

New South Wales, New Zealand, Western Australia

Ganister vs Icelandite Information

Earth’s outer layer is covered by rocks and these rocks have different physical and chemical properties. As two rocks are not same, it’s fun to compare them. You can also know more about Ganister and Icelandite Reserves. A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.. Icelandite belongs to volcanic igneous rocks which is rich in iron and belongs to andesite rock. These rocks are composed of many distinct minerals. The process of formation of rocks is different for various rocks. Rocks are quarried from many years for various purposes. You can check out Ganister vs Icelandite information and Ganister vs Icelandite characteristics in the upcoming sections.

Compare Sedimentary Rocks » More

Ganister vs Conglomerate

Ganister vs Mudstone

Ganister vs Chalk

» More

More Compare Sedimentary Rocks

Ganister vs Icelandite Characteristics

Though some rocks look identical, they have certain characteristics which distinguish them from others. Characteristics of rocks include texture, appearance, color, fracture, streak, hardness etc. Ganister vs Icelandite characteristics assist us to distinguish and recognize rocks. Also you can check about Properties of Ganister and Properties of Icelandite. Learn more about Ganister vs Icelandite in the next section. The interior uses of Ganister include Decorative aggregates, Entryways, Flooring, Homes and Interior decoration whereas the interior uses of Icelandite include Decorative aggregates, Floor tiles, Homes, Interior decoration and Kitchens. Due to some exceptional properties of Ganister and Icelandite, they have various applications in construction industry. The uses of Ganister in construction industry include Cement manufacture, Construction aggregate, For road aggregate, Production of glass and ceramics, Raw material for the manufacture of mortar and that of Icelandite include Cobblestones, Construction aggregate, For road aggregate.

More about Ganister and Icelandite

Here you can know more about Ganister and Icelandite. The life cycle of a rock consists of formation of rock, composition of rock and transformation of rock. The composition of Ganister and Icelandite consists of mineral content and compound content. The mineral content of Ganister includes Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz and mineral content of Icelandite includes Amphibole, Apatite, Biotite, Feldspar, Garnet, Hornblade, Ilmenite, Magnetite, Plagioclase, Pyroxene, Quartz, Zircon. You can also check out the list of all Sedimentary Rocks. When we have to compare Ganister vs Icelandite, the texture, color and appearance plays an important role in determining the type of rock. Ganister is available in beige, black, brown, colourless, cream, dark brown, green, grey, light green, light to dark grey, pink, red, white, yellow colors whereas, Icelandite is available in bluish - grey, grey, pink, yellow colors. Appearance of Ganister is Rough and that of Icelandite is Dull and Soft. Properties of rock is another aspect for Ganister vs Icelandite. The hardness of Ganister is 6-7 and that of Icelandite is 7. The types of Ganister are Not Available whereas types of Icelandite are Not Available. Streak of rock is the color of powder produced when it is dragged across an unweathered surface. The streak of Ganister and Icelandite is white. The specific heat capacity of Ganister is 0.92 kJ/Kg K and that of Icelandite is 2.39 kJ/Kg K. Depending on the properties like hardness, toughness, specific heat capacity, porosity etc., rocks are resistant to heat, wear, impact, etc.Ganister is heat resistant, impact resistant, pressure resistant whereas Icelandite is heat resistant, pressure resistant, scratch resistant, wear resistant.