Ganister

Dacite

Ganister vs Dacite

Ganister

Dacite

Add ⊕

1 Definition

1.1 Definition

A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.

Dacite is a volcanic igneous rock which is rintermediate in composition between andesite and rhyolite

1.2 History

1.2.1 Origin

England

Romania and Moldova, Europe

1.2.2 Discoverer

Unknown

1.3 Etymology

From gan′is-ter i.e a hard, close-grained siliceous stone, often forming the stratum which underlies a coal-seam

From Dacia, a province of the Roman Empire which lay between the Danube River and Carpathian Mountains where the rock was first described

1.4 Class

Sedimentary Rocks

Igneous Rocks

1.4.1 Sub-Class

Durable Rock, Hard Rock

Durable Rock, Soft Rock

1.5 Family

1.5.1 Group

Not Applicable

Volcanic

1.6 Other Categories

Coarse Grained Rock, Fine Grained Rock, Opaque Rock

Fine Grained Rock, Medium Grained Rock, Opaque Rock

2 Texture

2.1 Texture

Clastic, Granular, Rough

Aphanitic to Porphyritic

2.2 Color

Beige, Black, Brown, Colourless, Cream, Dark Brown, Green, Grey, Light Green, Light to Dark Grey, Pink, Red, White, Yellow

Bluish - Grey, Brown, Grey, Light to Dark Grey

2.3 Maintenance

Less

2.4 Durability

Durable

2.4.1 Water Resistant

✔ ✘

2.4.2 Scratch Resistant

✔ ✘

2.4.3 Stain Resistant

✔ ✘

2.4.4 Wind Resistant

✔ ✘

2.4.5 Acid Resistant

✔ ✘

2.5 Appearance

Rough

Vesicular

3 Uses

3.1 Architecture

3.1.1 Interior Uses

Decorative Aggregates, Entryways, Flooring, Homes, Interior Decoration

Decorative Aggregates, Entryways, Interior Decoration

3.1.2 Exterior Uses

As Building Stone, Garden Decoration, Office Buildings, Paving Stone

As Building Stone, Paving Stone, Garden Decoration

3.1.3 Other Architectural Uses

Curbing

3.2 Industry

3.2.1 Construction Industry

Cement Manufacture, Construction Aggregate, for Road Aggregate, Production of Glass and Ceramics, Raw material for the manufacture of mortar

As Dimension Stone, Construction Aggregate, for Road Aggregate, Landscaping

3.2.2 Medical Industry

Not Yet Used

3.3 Antiquity Uses

Artifacts, Monuments, Sculpture, Small Figurines

Artifacts

3.4 Other Uses

3.4.1 Commercial Uses

An Oil and Gas Reservoir, In aquifers, Petroleum reservoirs, Soil Conditioner, Source of Magnesia (MgO), Tombstones

Commemorative Tablets, Creating Artwork

4 Types

4.1 Types

Not Available

Footwall Dacite, Hanging wall Dacite, Tuff and Biotite Dacite

4.2 Features

Available in Lots of Colors and Patterns, Generally rough to touch, Very fine grained rock

Host Rock for Lead, Is one of the oldest rock

4.3 Archaeological Significance

4.3.1 Monuments

Used

Not Yet Used

4.3.2 Famous Monuments

Data Not Available

Not Applicable

4.3.3 Sculpture

Used

Not Yet Used

4.3.4 Famous Sculptures

Data Not Available

Not Applicable

4.3.5 Pictographs

Not Used

Used

4.3.6 Petroglyphs

Not Used

Used

4.3.7 Figurines

Used

Not Yet Used

4.4 Fossils

Present

Absent

5 Formation

5.1 Formation

Ganisters are formed by the destruction of easily weathered minerals mainly feldspar, within the surface horizon of soil by soil-forming processes.

Dacitic magma is formed by the subduction of young oceanic crust under a thick felsic continental plate. Further, the Oceanic crust is hydrothermally altered as quartz and sodium are added.

5.2 Composition

5.2.1 Mineral Content

Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz

Amphibole, Apatite, Biotite, Feldspar, Garnet, Hornblade, Magnetite, Plagioclase, Pyroxene, Quartz, Zircon

5.2.2 Compound Content

Aluminium Oxide, CaO, Iron(III) Oxide, Potassium Oxide, MgO, Sodium Oxide, Silicon Dioxide

Ca, Fe, Potassium Oxide, Mg, Potassium, Silicon Dioxide

5.3 Transformation

5.3.1 Metamorphism

✔ ✘

5.3.2 Types of Metamorphism

Not Applicable

Burial Metamorphism, Cataclastic Metamorphism

5.3.3 Weathering

✔ ✘

5.3.4 Types of Weathering

Biological Weathering

Biological Weathering, Chemical Weathering, Mechanical Weathering

5.3.5 Erosion

✔ ✘

5.3.6 Types of Erosion

Water Erosion, Wind Erosion

Chemical Erosion

6 Properties

6.1 Physical Properties

6.1.1 Hardness

6-72-2.25

1 7

6.1.2 Grain Size

Coarse or Fine

Medium to Fine Coarse Grained

6.1.3 Fracture

Splintery

Conchoidal

6.1.4 Streak

White

6.1.5 Porosity

Highly Porous

Less Porous

6.1.6 Luster

Dull

Subvitreous to Dull

6.1.7 Compressive Strength

95.00 N/mm²NA

0.15 450

6.1.8 Cleavage

Perfect

6.1.9 Toughness

2.6

Not Available

6.1.10 Specific Gravity

2.2-2.82.86-2.87

0 8.4

6.1.11 Transparency

Opaque

Translucent

6.1.12 Density

2.2-2.8 g/cm³2.77-2.771 g/cm³

0 1400

6.2 Thermal Properties

6.2.1 Specific Heat Capacity

0.92 kJ/Kg K0.92 kJ/Kg K

0.14 3.2

6.2.2 Resistance

Heat Resistant, Impact Resistant, Pressure Resistant

Heat Resistant, Impact Resistant, Pressure Resistant, Wear Resistant

7 Reserves

7.1 Deposits in Eastern Continents

7.1.1 Asia

China, India, Kazakhstan, Mongolia, Russia, Uzbekistan

Not Yet Found

7.1.2 Africa

Namibia, Nigeria, South Africa

Not Yet Found

7.1.3 Europe

Austria, Denmark, Germany, Great Britain, Netherlands, Norway, Poland, Sweden, Switzerland, United Kingdom

France, Greece, Romania, Scotland, Spain

7.1.4 Others

Greenland

Not Yet Found

7.2 Deposits in Western Continents

7.2.1 North America

Canada, USA

USA

7.2.2 South America

Brazil

Argentina, Bolivia, Chile, Colombia, Ecuador, Peru, Venezuela

7.3 Deposits in Oceania Continent

7.3.1 Australia

New South Wales, New Zealand

New Zealand, South Australia, Western Australia

Ganister vs Dacite Information

Earth’s outer layer is covered by rocks and these rocks have different physical and chemical properties. As two rocks are not same, it’s fun to compare them. You can also know more about Ganister and Dacite Reserves. A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.. Dacite is a volcanic igneous rock which is rintermediate in composition between andesite and rhyolite. These rocks are composed of many distinct minerals. The process of formation of rocks is different for various rocks. Rocks are quarried from many years for various purposes. You can check out Ganister vs Dacite information and Ganister vs Dacite characteristics in the upcoming sections.

Compare Sedimentary Rocks » More

Ganister vs Conglomerate

Ganister vs Chalk

Ganister vs Mudstone

» More

More Compare Sedimentary Rocks

Ganister vs Dacite Characteristics

Though some rocks look identical, they have certain characteristics which distinguish them from others. Characteristics of rocks include texture, appearance, color, fracture, streak, hardness etc. Ganister vs Dacite characteristics assist us to distinguish and recognize rocks. Also you can check about Properties of Ganister and Properties of Dacite. Learn more about Ganister vs Dacite in the next section. The interior uses of Ganister include Decorative aggregates, Entryways, Flooring, Homes and Interior decoration whereas the interior uses of Dacite include Decorative aggregates, Entryways and Interior decoration. Due to some exceptional properties of Ganister and Dacite, they have various applications in construction industry. The uses of Ganister in construction industry include Cement manufacture, Construction aggregate, For road aggregate, Production of glass and ceramics, Raw material for the manufacture of mortar and that of Dacite include As dimension stone, Construction aggregate, For road aggregate, Landscaping.

More about Ganister and Dacite

Here you can know more about Ganister and Dacite. The life cycle of a rock consists of formation of rock, composition of rock and transformation of rock. The composition of Ganister and Dacite consists of mineral content and compound content. The mineral content of Ganister includes Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz and mineral content of Dacite includes Amphibole, Apatite, Biotite, Feldspar, Garnet, Hornblade, Magnetite, Plagioclase, Pyroxene, Quartz, Zircon. You can also check out the list of all Sedimentary Rocks. When we have to compare Ganister vs Dacite, the texture, color and appearance plays an important role in determining the type of rock. Ganister is available in beige, black, brown, colourless, cream, dark brown, green, grey, light green, light to dark grey, pink, red, white, yellow colors whereas, Dacite is available in bluish - grey, brown, grey, light to dark grey colors. Appearance of Ganister is Rough and that of Dacite is Vesicular. Properties of rock is another aspect for Ganister vs Dacite. The hardness of Ganister is 6-7 and that of Dacite is 2-2.25. The types of Ganister are Not Available whereas types of Dacite are Footwall Dacite, Hanging wall Dacite, Tuff and Biotite Dacite. Streak of rock is the color of powder produced when it is dragged across an unweathered surface. The streak of Ganister and Dacite is white. The specific heat capacity of Ganister is 0.92 kJ/Kg K and that of Dacite is 0.92 kJ/Kg K. Depending on the properties like hardness, toughness, specific heat capacity, porosity etc., rocks are resistant to heat, wear, impact, etc.Ganister is heat resistant, impact resistant, pressure resistant whereas Dacite is heat resistant, impact resistant, pressure resistant, wear resistant.