×

Ganister
Ganister

Cataclasite
Cataclasite



ADD
Compare
X
Ganister
X
Cataclasite

Ganister vs Cataclasite

1 Definition
1.1 Definition
A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.
Cataclasite is a type of cataclastic rock that is formed by fracturing and comminution during faulting. It is normally cohesive and non-foliated, consisting of angular clasts in a finer-grained matrix
1.2 History
1.2.1 Origin
England
Swiss Alps, Europe
1.2.2 Discoverer
Unknown
Michael Tellinger
1.3 Etymology
From gan′is-ter i.e a hard, close-grained siliceous stone, often forming the stratum which underlies a coal-seam
From the Italian word cataclasi
1.4 Class
Sedimentary Rocks
Metamorphic Rocks
1.4.1 Sub-Class
Durable Rock, Hard Rock
Durable Rock, Medium Hardness Rock
1.5 Family
1.5.1 Group
Not Applicable
Not Applicable
1.6 Other Categories
Coarse Grained Rock, Fine Grained Rock, Opaque Rock
Fine Grained Rock, Opaque Rock
2 Texture
2.1 Texture
Clastic, Granular, Rough
Clastic
2.2 Color
Beige, Black, Brown, Colourless, Cream, Dark Brown, Green, Grey, Light Green, Light to Dark Grey, Pink, Red, White, Yellow
Brown, Green, White, Yellow
2.3 Maintenance
Less
Less
2.4 Durability
Durable
Durable
2.4.1 Water Resistant
2.4.2 Scratch Resistant
2.4.3 Stain Resistant
2.4.4 Wind Resistant
2.4.5 Acid Resistant
2.5 Appearance
Rough
Dull and Banded
3 Uses
3.1 Architecture
3.1.1 Interior Uses
Decorative Aggregates, Entryways, Flooring, Homes, Interior Decoration
Decorative Aggregates, Homes
3.1.2 Exterior Uses
As Building Stone, Garden Decoration, Office Buildings, Paving Stone
As Building Stone, As Facing Stone, Paving Stone
3.1.3 Other Architectural Uses
Curbing
Curbing
3.2 Industry
3.2.1 Construction Industry
Cement Manufacture, Construction Aggregate, for Road Aggregate, Production of Glass and Ceramics, Raw material for the manufacture of mortar
As Dimension Stone, Building houses or walls, Cement Manufacture, Construction Aggregate, for Road Aggregate
3.2.2 Medical Industry
Not Yet Used
Not Yet Used
3.3 Antiquity Uses
Artifacts, Monuments, Sculpture, Small Figurines
Artifacts
3.4 Other Uses
3.4.1 Commercial Uses
An Oil and Gas Reservoir, In aquifers, Petroleum reservoirs, Soil Conditioner, Source of Magnesia (MgO), Tombstones
Commemorative Tablets, Creating Artwork
4 Types
4.1 Types
Not Available
Protocataclasite, Mesocataclasite, Ultracataclasite and Foliated cataclasite
4.2 Features
Available in Lots of Colors and Patterns, Generally rough to touch, Very fine grained rock
Easily splits into thin plates, Is one of the oldest rock
4.3 Archaeological Significance
4.3.1 Monuments
Used
Not Yet Used
4.3.2 Famous Monuments
Data Not Available
Not Applicable
4.3.3 Sculpture
Used
Not Yet Used
4.3.4 Famous Sculptures
Data Not Available
Not Applicable
4.3.5 Pictographs
Not Used
Used
4.3.6 Petroglyphs
Not Used
Used
4.3.7 Figurines
Used
Not Yet Used
4.4 Fossils
Present
Absent
5 Formation
5.1 Formation
Ganisters are formed by the destruction of easily weathered minerals mainly feldspar, within the surface horizon of soil by soil-forming processes.
Cataclasiste rocks mainly form by pressure deep under the Earth's surface, from the extreme heat caused by magma or by the intense collisions and friction of tectonic plates.
5.2 Composition
5.2.1 Mineral Content
Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz
Albite, Apatite, Augite, Biotite, Calcite, Enstatite, Epidote, Feldspar, Micas, Muscovite or Illite, Pyroxene, Quartz
5.2.2 Compound Content
Aluminium Oxide, CaO, Iron(III) Oxide, Potassium Oxide, MgO, Sodium Oxide, Silicon Dioxide
Silicon Dioxide
5.3 Transformation
5.3.1 Metamorphism
5.3.2 Types of Metamorphism
Not Applicable
Not Applicable
5.3.3 Weathering
5.3.4 Types of Weathering
Biological Weathering
Mechanical Weathering
5.3.5 Erosion
5.3.6 Types of Erosion
Water Erosion, Wind Erosion
Coastal Erosion, Wind Erosion
6 Properties
6.1 Physical Properties
6.1.1 Hardness
6-73-4
Coal
1 7
6.1.2 Grain Size
Coarse or Fine
Fine Grained
6.1.3 Fracture
Splintery
NA
6.1.4 Streak
White
Black
6.1.5 Porosity
Highly Porous
Less Porous
6.1.6 Luster
Dull
Vitreous
6.1.7 Compressive Strength
95.00 N/mm2NA
Obsidian
0.15 450
6.1.8 Cleavage
Perfect
Not Available
6.1.9 Toughness
2.6
Not Available
6.1.10 Specific Gravity
2.2-2.82.1
Granite
0 8.4
6.1.11 Transparency
Opaque
Translucent to Opaque
6.1.12 Density
2.2-2.8 g/cm32.9-3.1 g/cm3
Granite
0 1400
6.2 Thermal Properties
6.2.1 Specific Heat Capacity
0.92 kJ/Kg KNA
Granulite
0.14 3.2
6.2.2 Resistance
Heat Resistant, Impact Resistant, Pressure Resistant
Heat Resistant, Impact Resistant, Pressure Resistant
7 Reserves
7.1 Deposits in Eastern Continents
7.1.1 Asia
China, India, Kazakhstan, Mongolia, Russia, Uzbekistan
China, India, Russia, Saudi Arabia, South Korea
7.1.2 Africa
Namibia, Nigeria, South Africa
Egypt, Ethiopia, Kenya, Madagascar, Morocco, South Africa
7.1.3 Europe
Austria, Denmark, Germany, Great Britain, Netherlands, Norway, Poland, Sweden, Switzerland, United Kingdom
England, Finland, France, Spain, United Kingdom
7.1.4 Others
Greenland
Not Yet Found
7.2 Deposits in Western Continents
7.2.1 North America
Canada, USA
Canada, USA
7.2.2 South America
Brazil
Argentina, Colombia
7.3 Deposits in Oceania Continent
7.3.1 Australia
New South Wales, New Zealand
Central Australia, Western Australia

Ganister vs Cataclasite Information

Earth’s outer layer is covered by rocks and these rocks have different physical and chemical properties. As two rocks are not same, it’s fun to compare them. You can also know more about Ganister and Cataclasite Reserves. A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.. Cataclasite is a type of cataclastic rock that is formed by fracturing and comminution during faulting. It is normally cohesive and non-foliated, consisting of angular clasts in a finer-grained matrix. These rocks are composed of many distinct minerals. The process of formation of rocks is different for various rocks. Rocks are quarried from many years for various purposes. You can check out Ganister vs Cataclasite information and Ganister vs Cataclasite characteristics in the upcoming sections.

Ganister vs Cataclasite Characteristics

Though some rocks look identical, they have certain characteristics which distinguish them from others. Characteristics of rocks include texture, appearance, color, fracture, streak, hardness etc. Ganister vs Cataclasite characteristics assist us to distinguish and recognize rocks. Also you can check about Properties of Ganister and Properties of Cataclasite. Learn more about Ganister vs Cataclasite in the next section. The interior uses of Ganister include Decorative aggregates, Entryways, Flooring, Homes and Interior decoration whereas the interior uses of Cataclasite include Decorative aggregates and Homes. Due to some exceptional properties of Ganister and Cataclasite, they have various applications in construction industry. The uses of Ganister in construction industry include Cement manufacture, Construction aggregate, For road aggregate, Production of glass and ceramics, Raw material for the manufacture of mortar and that of Cataclasite include As dimension stone, Building houses or walls, Cement manufacture, Construction aggregate, For road aggregate.

More about Ganister and Cataclasite

Here you can know more about Ganister and Cataclasite. The life cycle of a rock consists of formation of rock, composition of rock and transformation of rock. The composition of Ganister and Cataclasite consists of mineral content and compound content. The mineral content of Ganister includes Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz and mineral content of Cataclasite includes Albite, Apatite, Augite, Biotite, Calcite, Enstatite, Epidote, Feldspar, Micas, Muscovite or Illite, Pyroxene, Quartz. You can also check out the list of all . When we have to compare Ganister vs Cataclasite, the texture, color and appearance plays an important role in determining the type of rock. Ganister is available in beige, black, brown, colourless, cream, dark brown, green, grey, light green, light to dark grey, pink, red, white, yellow colors whereas, Cataclasite is available in brown, green, white, yellow colors. Appearance of Ganister is Rough and that of Cataclasite is Dull and Banded. Properties of rock is another aspect for Ganister vs Cataclasite. The hardness of Ganister is 6-7 and that of Cataclasite is 3-4. The types of Ganister are Not Available whereas types of Cataclasite are Protocataclasite, Mesocataclasite, Ultracataclasite and Foliated cataclasite. Streak of rock is the color of powder produced when it is dragged across an unweathered surface. The streak of Ganister is white while that of Cataclasite is black. The specific heat capacity of Ganister is 0.92 kJ/Kg K and that of Cataclasite is Not Available. Depending on the properties like hardness, toughness, specific heat capacity, porosity etc., rocks are resistant to heat, wear, impact, etc.Ganister is heat resistant, impact resistant, pressure resistant whereas Cataclasite is heat resistant, impact resistant, pressure resistant.