Ganister

Borolanite

Ganister vs Borolanite

Ganister

Borolanite

Add ⊕

1 Definition

1.1 Definition

A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.

Borolanite is a variety of Nepheline Syenite and belongs to igneous rocks and contains nepheline-alkali feldspar pseudomorphs which occur as conspicuous white spots in the dark rock matrix

1.2 History

1.2.1 Origin

England

Scotland

1.2.2 Discoverer

Unknown

1.3 Etymology

From gan′is-ter i.e a hard, close-grained siliceous stone, often forming the stratum which underlies a coal-seam

From Alkalic Igneous complex near Loch Borralan in northwest Scotland

1.4 Class

Sedimentary Rocks

Igneous Rocks

1.4.1 Sub-Class

Durable Rock, Hard Rock

Durable Rock, Medium Hardness Rock

1.5 Family

1.5.1 Group

Not Applicable

Plutonic

1.6 Other Categories

Coarse Grained Rock, Fine Grained Rock, Opaque Rock

Fine Grained Rock, Opaque Rock

2 Texture

2.1 Texture

Clastic, Granular, Rough

Granular

2.2 Color

Beige, Black, Brown, Colourless, Cream, Dark Brown, Green, Grey, Light Green, Light to Dark Grey, Pink, Red, White, Yellow

Brown, Buff, Cream, Green, Grey, Pink, White

2.3 Maintenance

Less

2.4 Durability

Durable

2.4.1 Water Resistant

✔ ✘

2.4.2 Scratch Resistant

✔ ✘

2.4.3 Stain Resistant

✔ ✘

2.4.4 Wind Resistant

✔ ✘

2.4.5 Acid Resistant

✔ ✘

2.5 Appearance

Rough

Banded and Foilated

3 Uses

3.1 Architecture

3.1.1 Interior Uses

Decorative Aggregates, Entryways, Flooring, Homes, Interior Decoration

Countertops, Decorative Aggregates, Flooring, Homes, Interior Decoration

3.1.2 Exterior Uses

As Building Stone, Garden Decoration, Office Buildings, Paving Stone

As Building Stone, As Facing Stone, Paving Stone, Garden Decoration, Office Buildings

3.1.3 Other Architectural Uses

Curbing

3.2 Industry

3.2.1 Construction Industry

Cement Manufacture, Construction Aggregate, for Road Aggregate, Production of Glass and Ceramics, Raw material for the manufacture of mortar

As Dimension Stone, Cement Manufacture, Construction Aggregate, for Road Aggregate, Landscaping, Making natural cement, Manufacture of Magnesium and Dolomite Refractories, Production of Glass and Ceramics

3.2.2 Medical Industry

Not Yet Used

3.3 Antiquity Uses

Artifacts, Monuments, Sculpture, Small Figurines

Artifacts

3.4 Other Uses

3.4.1 Commercial Uses

An Oil and Gas Reservoir, In aquifers, Petroleum reservoirs, Soil Conditioner, Source of Magnesia (MgO), Tombstones

Cemetery Markers

4 Types

4.1 Types

Not Available

4.2 Features

Available in Lots of Colors and Patterns, Generally rough to touch, Very fine grained rock

Application of acids on the surface causes cloudy frosting, Available in Lots of Colors and Patterns, Dissolves in hydrochloric acid, Is one of the oldest rock

4.3 Archaeological Significance

4.3.1 Monuments

Used

4.3.2 Famous Monuments

Data Not Available

4.3.3 Sculpture

Used

4.3.4 Famous Sculptures

Data Not Available

4.3.5 Pictographs

Not Used

Used

4.3.6 Petroglyphs

Not Used

Used

4.3.7 Figurines

Used

4.4 Fossils

Present

Absent

5 Formation

5.1 Formation

Ganisters are formed by the destruction of easily weathered minerals mainly feldspar, within the surface horizon of soil by soil-forming processes.

Borolanites are formed due to alkaline igneous activities and are generally formed in thick continental crustal areas or in Cordilleran subduction zones.

5.2 Composition

5.2.1 Mineral Content

Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz

Albite, Amphibole, Biotite, Cancrinite, Feldspar, Hornblende, Plagioclase, Pyroxene, Sodalite

5.2.2 Compound Content

Aluminium Oxide, CaO, Iron(III) Oxide, Potassium Oxide, MgO, Sodium Oxide, Silicon Dioxide

Aluminium Oxide, CaO, Iron(III) Oxide, FeO, Potassium Oxide, MgO, MnO, Sodium Oxide, Phosphorus Pentoxide, Silicon Dioxide, Titanium Dioxide

5.3 Transformation

5.3.1 Metamorphism

✔ ✘

5.3.2 Types of Metamorphism

Not Applicable

Regional Metamorphism

5.3.3 Weathering

✔ ✘

5.3.4 Types of Weathering

Biological Weathering

Chemical Weathering, Mechanical Weathering

5.3.5 Erosion

✔ ✘

5.3.6 Types of Erosion

Water Erosion, Wind Erosion

Wind Erosion

6 Properties

6.1 Physical Properties

6.1.1 Hardness

6-75.5-6

1 7

6.1.2 Grain Size

Coarse or Fine

Fine Grained

6.1.3 Fracture

Splintery

Conchoidal to Uneven

6.1.4 Streak

White

6.1.5 Porosity

Highly Porous

Less Porous

6.1.6 Luster

Dull

Greasy to Dull

6.1.7 Compressive Strength

95.00 N/mm²150.00 N/mm²

0.15 450

6.1.8 Cleavage

Perfect

Poor

6.1.9 Toughness

2.6

Not Available

6.1.10 Specific Gravity

2.2-2.82.6

0 8.4

6.1.11 Transparency

Opaque

Translucent to Opaque

6.1.12 Density

2.2-2.8 g/cm³2.6 g/cm³

0 1400

6.2 Thermal Properties

6.2.1 Specific Heat Capacity

0.92 kJ/Kg KNA

0.14 3.2

6.2.2 Resistance

Heat Resistant, Impact Resistant, Pressure Resistant

Heat Resistant, Impact Resistant, Wear Resistant

7 Reserves

7.1 Deposits in Eastern Continents

7.1.1 Asia

China, India, Kazakhstan, Mongolia, Russia, Uzbekistan

Indonesia, Iran, Russia, Saudi Arabia, Sri Lanka, Taiwan, Thailand, Turkey, Turkmenistan, Vietnam

7.1.2 Africa

Namibia, Nigeria, South Africa

Angola, Egypt, Madagascar, Namibia, Nigeria, South Africa

7.1.3 Europe

Austria, Denmark, Germany, Great Britain, Netherlands, Norway, Poland, Sweden, Switzerland, United Kingdom

Andorra, Finland, France, Great Britain, Italy, Norway, Portugal, Spain, Sweden

7.1.4 Others

Greenland

7.2 Deposits in Western Continents

7.2.1 North America

Canada, USA

7.2.2 South America

Brazil

Brazil, Chile, Colombia, Uruguay, Venezuela

7.3 Deposits in Oceania Continent

7.3.1 Australia

New South Wales, New Zealand

New Zealand, Queensland, South Australia, Tasmania, Western Australia

Ganister vs Borolanite Information

Earth’s outer layer is covered by rocks and these rocks have different physical and chemical properties. As two rocks are not same, it’s fun to compare them. You can also know more about Ganister and Borolanite Reserves. A ganister is a hard, fine-grained quartzose sandstone or orthoquartzite which is basically used in the manufacture of silica brick typically used to line furnaces and is a type of sedimentary rocks.. Borolanite is a variety of Nepheline Syenite and belongs to igneous rocks and contains nepheline-alkali feldspar pseudomorphs which occur as conspicuous white spots in the dark rock matrix. These rocks are composed of many distinct minerals. The process of formation of rocks is different for various rocks. Rocks are quarried from many years for various purposes. You can check out Ganister vs Borolanite information and Ganister vs Borolanite characteristics in the upcoming sections.

Compare Sedimentary Rocks » More

Ganister vs Chalk

Ganister vs Conglomerate

Ganister vs Mudstone

» More

More Compare Sedimentary Rocks

Ganister vs Borolanite Characteristics

Though some rocks look identical, they have certain characteristics which distinguish them from others. Characteristics of rocks include texture, appearance, color, fracture, streak, hardness etc. Ganister vs Borolanite characteristics assist us to distinguish and recognize rocks. Also you can check about Properties of Ganister and Properties of Borolanite. Learn more about Ganister vs Borolanite in the next section. The interior uses of Ganister include Decorative aggregates, Entryways, Flooring, Homes and Interior decoration whereas the interior uses of Borolanite include Countertops, Decorative aggregates, Flooring, Homes and Interior decoration. Due to some exceptional properties of Ganister and Borolanite, they have various applications in construction industry. The uses of Ganister in construction industry include Cement manufacture, Construction aggregate, For road aggregate, Production of glass and ceramics, Raw material for the manufacture of mortar and that of Borolanite include As dimension stone, Cement manufacture, Construction aggregate, For road aggregate, Landscaping, Making natural cement, Manufacture of magnesium and dolomite refractories, Production of glass and ceramics.

More about Ganister and Borolanite

Here you can know more about Ganister and Borolanite. The life cycle of a rock consists of formation of rock, composition of rock and transformation of rock. The composition of Ganister and Borolanite consists of mineral content and compound content. The mineral content of Ganister includes Calcite, Clay, Clay Minerals, Feldspar, Micas, Quartz and mineral content of Borolanite includes Albite, Amphibole, Biotite, Cancrinite, Feldspar, Hornblende, Plagioclase, Pyroxene, Sodalite. You can also check out the list of all Sedimentary Rocks. When we have to compare Ganister vs Borolanite, the texture, color and appearance plays an important role in determining the type of rock. Ganister is available in beige, black, brown, colourless, cream, dark brown, green, grey, light green, light to dark grey, pink, red, white, yellow colors whereas, Borolanite is available in brown, buff, cream, green, grey, pink, white colors. Appearance of Ganister is Rough and that of Borolanite is Banded and Foilated. Properties of rock is another aspect for Ganister vs Borolanite. The hardness of Ganister is 6-7 and that of Borolanite is 5.5-6. The types of Ganister are Not Available whereas types of Borolanite are Not Available. Streak of rock is the color of powder produced when it is dragged across an unweathered surface. The streak of Ganister and Borolanite is white. The specific heat capacity of Ganister is 0.92 kJ/Kg K and that of Borolanite is Not Available. Depending on the properties like hardness, toughness, specific heat capacity, porosity etc., rocks are resistant to heat, wear, impact, etc.Ganister is heat resistant, impact resistant, pressure resistant whereas Borolanite is heat resistant, impact resistant, wear resistant.